Add tests for compile success and failure with the utf8 option.

This requires a test in configure.ac for whether UTF8 is enabled in
the PCRE2 lib against which the VMOD is built.

configure.ac

@@ -99,6 +99,24 @@ else
    AC_SUBST([LOCALE_FR_VTC], [locale_fr.vtc.no])
 fi
 
+AC_MSG_CHECKING([whether pcre2 supports Unicode])
+my_save_cflags="$CFLAGS"
+CFLAGS="$PCRE2_CFLAGS -L $PCRE2_LIBS"
+AC_RUN_IFELSE([AC_LANG_SOURCE([[
+	#define PCRE2_CODE_UNIT_WIDTH 8
+	#include "pcre2.h"
+	#include <stdint.h>
+	int main() {
+		uint32_t where;
+		int ret = pcre2_config(PCRE2_CONFIG_UNICODE, &where);
+		if (ret < 0) return(-1);
+		return(where == 0);
+	}]])],
+	[ac_pcre2_unicode=yes], [ac_pcre2_unicode=no])
+AC_MSG_RESULT([$ac_pcre2_unicode])
+CFLAGS="$my_save_cflags"
+AC_SUBST([PCRE2_UTF8], [$ac_pcre2_unicode])
+
 # --enable-stack-protector
 AC_ARG_ENABLE(stack-protector,
        AS_HELP_STRING([--enable-stack-protector],[enable stack protector (default is YES)]),

src/Makefile.am

@@ -21,18 +21,22 @@ vcc_if.c: vcc_if.h
 vcc_if.h vmod_pcre2.man.rst: @VMODTOOL@ $(top_srcdir)/src/vmod_pcre2.vcc
 	@VMODTOOL@ $(top_srcdir)/src/vmod_pcre2.vcc
 
-VMOD_TESTS = $(top_srcdir)/src/tests/*.vtc $(top_srcdir)/src/tests/locale_fr.vtc
+VMOD_TESTS = $(builddir)/tests/*.vtc $(builddir)/tests/locale_fr.vtc $(builddir)/tests/compile_utf8.vtc
 .PHONY: $(VMOD_TESTS)
 
 locale_fr:
 	cp $(top_srcdir)/src/tests/@LOCALE_FR_VTC@ $(top_srcdir)/src/tests/locale_fr.vtc
 
-$(top_srcdir)/src/tests/*.vtc $(top_srcdir)/src/tests/locale_fr.vtc: locale_fr libvmod_pcre2.la
+utf8:
+	cp $(builddir)/tests/compile_utf8.vtc.@PCRE2_UTF8@ $(builddir)/tests/compile_utf8.vtc
+
+$(builddir)/tests/*.vtc $(builddir)/tests/locale_fr.vtc $(builddir)/tests/compile_utf8.vtc: locale_fr utf8 libvmod_pcre2.la
 	PATH=@LIBVARNISHAPI_SBINDIR@:$$PATH \
 	@VARNISHTEST@ -Dvmod_topbuild=$(abs_top_builddir) $@
 
 check: $(VMOD_TESTS)
 	rm $(top_srcdir)/src/tests/locale_fr.vtc
+	rm $(builddir)/tests/compile_utf8.vtc
 
 EXTRA_DIST = \
 	vmod_pcre2.vcc \

src/tests/compile_utf8.vtc.no

+# -*-mode: vcl; coding: utf-8;-*-
+
+# Those instructions tell emacs to use utf-8 encoding for this source;
+# you might want to set up your editor similarly.
+
+varnishtest "compilation success and failure when pcre2 unicode is disabled"
+
+# compiles, but is not interpreted as utf8
+varnish v1 -vcl {
+	import pcre2 from "${vmod_topbuild}/src/.libs/libvmod_pcre2.so";
+	backend b { .host = "${bad_ip}"; }
+
+	sub vcl_init {
+		new r1 = pcre2.regex(pattern=
+"[^ABCDEFGHIJKLMNOPQRSTUVWXYZÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝÞĀĂĄĆĈĊČĎĐĒĔĖĘĚĜĞĠĢĤĦĨĪĬĮİIJĴĶĹĻĽĿŁŃŅŇŊŌŎŐŒŔŖŘŚŜŞŠŢŤŦŨŪŬŮŰŲŴŶŸŹŻŽƁƂƄƆƇƉƊƋƎƏƐƑƓƔƖƗƘƜƝƟƠƢƤƦƧƩƬƮƯƱƲƳƵƷƸƼDŽLJNJǍǏǑǓǕǗǙǛǞǠǢǤǦǨǪǬǮDZǴǶǷǸǺǼǾȀȂȄȆȈȊȌȎȐȒȔȖȘȚȜȞȠȢȤȦȨȪȬȮȰȲȺȻȽȾɁΆΈΉΊΌΎΏΑΒΓΔΕΖΗΘΙΚΛΜΝΞΟΠΡΣΤΥΦΧΨΩΪΫϒϓϔϘϚϜϞϠϢϤϦϨϪϬϮϴϷϹϺϽϾϿЀЁЂЃЄЅІЇЈЉЊЋЌЍЎЏАБВГДЕЖЗИЙКЛМНОПРСТУФХЦЧШЩЪЫЬЭЮЯѠѢѤѦѨѪѬѮѰѲѴѶѸѺѼѾҀҊҌҎҐҒҔҖҘҚҜҞҠҢҤҦҨҪҬҮҰҲҴҶҸҺҼҾӀӁӃӅӇӉӋӍӐӒӔӖӘӚӜӞӠӢӤӦӨӪӬӮӰӲӴӶӸԀԂԄԆԈԊԌԎԱԲԳԴԵԶԷԸԹԺԻԼԽԾԿՀՁՂՃՄՅՆՇՈՉՊՋՌՍՎՏՐՑՒՓՔՕՖႠႡႢႣႤႥႦႧႨႩႪႫႬႭႮႯႰႱႲႳႴႵႶႷႸႹႺႻႼႽႾႿჀჁჂჃჄჅḀḂḄḆḈḊḌḎḐḒḔḖḘḚḜḞḠḢḤḦḨḪḬḮḰḲḴḶḸḺḼḾṀṂṄṆṈṊṌṎṐṒṔṖṘṚṜṞṠṢṤṦṨṪṬṮṰṲṴṶṸṺṼṾẀẂẄẆẈẊẌẎẐẒẔẠẢẤẦẨẪẬẮẰẲẴẶẸẺẼẾỀỂỄỆỈỊỌỎỐỒỔỖỘỚỜỞỠỢỤỦỨỪỬỮỰỲỴỶỸἈἉἊἋἌἍἎἏἘἙἚἛἜἝἨἩἪἫἬἭἮἯἸἹἺἻἼἽἾἿὈὉὊὋὌὍὙὛὝὟὨὩὪὫὬὭὮὯᾸᾹᾺΆῈΈῊΉῘῙῚΊῨῩῪΎῬῸΌῺΏabcdefghijklmnopqrstuvwxyzªµºßàáâãäåæçèéêëìíîïðñòóôõöøùúûüýþÿāăąćĉċčďđēĕėęěĝğġģĥħĩīĭįıijĵķĸĺļľŀłńņňʼnŋōŏőœŕŗřśŝşšţťŧũūŭůűųŵŷźżžſƀƃƅƈƌƍƒƕƙƚƛƞơƣƥƨƪƫƭưƴƶƹƺƽƾƿdžljnjǎǐǒǔǖǘǚǜǝǟǡǣǥǧǩǫǭǯǰdzǵǹǻǽǿȁȃȅȇȉȋȍȏȑȓȕȗșțȝȟȡȣȥȧȩȫȭȯȱȳȴȵȶȷȸȹȼȿɀɐɑɒɓɔɕɖɗɘəɚɛɜɝɞɟɠɡɢɣɤɥɦɧɨɩɪɫɬɭɮɯɰɱɲɳɴɵɶɷɸɹɺɻɼɽɾɿʀʁʂʃʄʅʆʇʈʉʊʋʌʍʎʏʐʑʒʓʔʕʖʗʘʙʚʛʜʝʞʟʠʡʢʣʤʥʦʧʨʩʪʫʬʭʮʯΐάέήίΰαβγδεζηθικλμνξοπρςστυφχψωϊϋόύώϐϑϕϖϗϙϛϝϟϡϣϥϧϩϫϭϯϰϱϲϳϵϸϻϼабвгдежзийклмнопрстуфхцчшщъыьэюяѐёђѓєѕіїјљњћќѝўџѡѣѥѧѩѫѭѯѱѳѵѷѹѻѽѿҁҋҍҏґғҕҗҙқҝҟҡңҥҧҩҫҭүұҳҵҷҹһҽҿӂӄӆӈӊӌӎӑӓӕӗәӛӝӟӡӣӥӧөӫӭӯӱӳӵӷӹԁԃԅԇԉԋԍԏաբգդեզէըթժիլխծկհձղճմյնշոչպջռսվտրցւփքօֆևᴀᴁᴂᴃᴄᴅᴆᴇᴈᴉᴊᴋᴌᴍᴎᴏᴐᴑᴒᴓᴔᴕᴖᴗᴘᴙᴚᴛᴜᴝᴞᴟᴠᴡᴢᴣᴤᴥᴦᴧᴨᴩᴪᴫᵢᵣᵤᵥᵦᵧᵨᵩᵪᵫᵬᵭᵮᵯᵰᵱᵲᵳᵴᵵᵶᵷᵹᵺᵻᵼᵽᵾᵿᶀᶁᶂᶃᶄᶅᶆᶇᶈᶉᶊᶋᶌᶍᶎᶏᶐᶑᶒᶓᶔᶕᶖᶗᶘᶙᶚḁḃḅḇḉḋḍḏḑḓḕḗḙḛḝḟḡḣḥḧḩḫḭḯḱḳḵḷḹḻḽḿṁṃṅṇṉṋṍṏṑṓṕṗṙṛṝṟṡṣṥṧṩṫṭṯṱṳṵṷṹṻṽṿẁẃẅẇẉẋẍẏẑẓẕẖẗẘẙẚẛạảấầẩẫậắằẳẵặẹẻẽếềểễệỉịọỏốồổỗộớờởỡợụủứừửữựỳỵỷỹἀἁἂἃἄἅἆἇἐἑἒἓἔἕἠἡἢἣἤἥἦἧἰἱἲἳἴἵἶἷὀὁὂὃὄὅὐὑὒὓὔὕὖὗὠὡὢὣὤὥὦὧὰάὲέὴήὶίὸόὺύὼώᾀᾁᾂᾃᾄᾅᾆᾇᾐᾑᾒᾓᾔᾕᾖᾗᾠᾡᾢᾣᾤᾥᾦᾧᾰᾱᾲᾳᾴᾶᾷιῂῃῄῆῇῐῑῒΐῖῗῠῡῢΰῤῥῦῧῲῳῴῶῷⲁⲃⲅⲇⲉⲋⲍⲏⲑⲓⲕⲗⲙⲛⲝⲟⲡⲣⲥⲧⲩⲫⲭⲯⲱⲳⲵⲷⲹⲻⲽⲿⳁⳃⳅⳇⳉⳋⳍⳏⳑⳓⳕⳗⳙⳛⳝⳟⳡⳣⳤⴀⴁⴂⴃⴄⴅⴆⴇⴈⴉⴊⴋⴌⴍⴎⴏⴐⴑⴒⴓⴔⴕⴖⴗⴘⴙⴚⴛⴜⴝⴞⴟⴠⴡⴢⴣⴤⴥfffiflffifflſtstﬓﬔﬕﬖﬗ\d-_^]");
+	}
+} -start
+
+varnish v1 -errvcl {vmod pcre2 error: Cannot compile '.' in r constructor: this version of PCRE2 does not have Unicode support at offset 0} {
+	import pcre2 from "${vmod_topbuild}/src/.libs/libvmod_pcre2.so";
+	backend b { .host = "${bad_ip}"; }
+
+	sub vcl_init {
+		new r = pcre2.regex(".", utf=true);
+	}
+}
+
+varnish v1 -errvcl {vmod pcre2 error: Cannot compile '.' in r constructor: this version of PCRE2 does not have Unicode support at offset 0} {
+	import pcre2 from "${vmod_topbuild}/src/.libs/libvmod_pcre2.so";
+	backend b { .host = "${bad_ip}"; }
+
+	sub vcl_init {
+		new r = pcre2.regex(".", ucp=true);
+	}
+}
+
+# These options are legal when Unicode is not supported.
+varnish v1 -vcl {
+	import pcre2 from "${vmod_topbuild}/src/.libs/libvmod_pcre2.so";
+	backend b { .host = "${bad_ip}"; }
+
+	sub vcl_init {
+		new r = pcre2.regex(".", never_ucp=true, never_utf=true);
+	}
+}

src/tests/compile_utf8.vtc.yes

+# -*-mode: vcl; coding: raw-text;-*-
+
+# Those instructions tell emacs *not* to use utf-8 encoding for this
+# source; that may seem counter-intuitive, but it's due to tests below
+# for PCRE2 reacting to illegal byte sequences in UTF8 mode (with
+# compile failures).  You might want to set up your editor similarly.
+
+varnishtest "compilation success and failure for patterns with UTF8 chars"
+# Test data from pcre2 testinput4, testinput5 and testintput10
+
+varnish v1 -vcl {
+	import pcre2 from "${vmod_topbuild}/src/.libs/libvmod_pcre2.so";
+	backend b { .host = "${bad_ip}"; }
+
+	sub vcl_init {
+		new r1 = pcre2.regex(utf=true, pattern=
+"[^ABCDEFGHIJKLMNOPQRSTUVWXYZÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏÐÑÒÓÔÕÖØÙÚÛÜÝÞĀĂĄĆĈĊČĎĐĒĔĖĘĚĜĞĠĢĤĦĨĪĬĮİIJĴĶĹĻĽĿŁŃŅŇŊŌŎŐŒŔŖŘŚŜŞŠŢŤŦŨŪŬŮŰŲŴŶŸŹŻŽƁƂƄƆƇƉƊƋƎƏƐƑƓƔƖƗƘƜƝƟƠƢƤƦƧƩƬƮƯƱƲƳƵƷƸƼDŽLJNJǍǏǑǓǕǗǙǛǞǠǢǤǦǨǪǬǮDZǴǶǷǸǺǼǾȀȂȄȆȈȊȌȎȐȒȔȖȘȚȜȞȠȢȤȦȨȪȬȮȰȲȺȻȽȾɁΆΈΉΊΌΎΏΑΒΓΔΕΖΗΘΙΚΛΜΝΞΟΠΡΣΤΥΦΧΨΩΪΫϒϓϔϘϚϜϞϠϢϤϦϨϪϬϮϴϷϹϺϽϾϿЀЁЂЃЄЅІЇЈЉЊЋЌЍЎЏАБВГДЕЖЗИЙКЛМНОПРСТУФХЦЧШЩЪЫЬЭЮЯѠѢѤѦѨѪѬѮѰѲѴѶѸѺѼѾҀҊҌҎҐҒҔҖҘҚҜҞҠҢҤҦҨҪҬҮҰҲҴҶҸҺҼҾӀӁӃӅӇӉӋӍӐӒӔӖӘӚӜӞӠӢӤӦӨӪӬӮӰӲӴӶӸԀԂԄԆԈԊԌԎԱԲԳԴԵԶԷԸԹԺԻԼԽԾԿՀՁՂՃՄՅՆՇՈՉՊՋՌՍՎՏՐՑՒՓՔՕՖႠႡႢႣႤႥႦႧႨႩႪႫႬႭႮႯႰႱႲႳႴႵႶႷႸႹႺႻႼႽႾႿჀჁჂჃჄჅḀḂḄḆḈḊḌḎḐḒḔḖḘḚḜḞḠḢḤḦḨḪḬḮḰḲḴḶḸḺḼḾṀṂṄṆṈṊṌṎṐṒṔṖṘṚṜṞṠṢṤṦṨṪṬṮṰṲṴṶṸṺṼṾẀẂẄẆẈẊẌẎẐẒẔẠẢẤẦẨẪẬẮẰẲẴẶẸẺẼẾỀỂỄỆỈỊỌỎỐỒỔỖỘỚỜỞỠỢỤỦỨỪỬỮỰỲỴỶỸἈἉἊἋἌἍἎἏἘἙἚἛἜἝἨἩἪἫἬἭἮἯἸἹἺἻἼἽἾἿὈὉὊὋὌὍὙὛὝὟὨὩὪὫὬὭὮὯᾸᾹᾺΆῈΈῊΉῘῙῚΊῨῩῪΎῬῸΌῺΏabcdefghijklmnopqrstuvwxyzªµºßàáâãäåæçèéêëìíîïðñòóôõöøùúûüýþÿāăąćĉċčďđēĕėęěĝğġģĥħĩīĭįıijĵķĸĺļľŀłńņňʼnŋōŏőœŕŗřśŝşšţťŧũūŭůűųŵŷźżžſƀƃƅƈƌƍƒƕƙƚƛƞơƣƥƨƪƫƭưƴƶƹƺƽƾƿdžljnjǎǐǒǔǖǘǚǜǝǟǡǣǥǧǩǫǭǯǰdzǵǹǻǽǿȁȃȅȇȉȋȍȏȑȓȕȗșțȝȟȡȣȥȧȩȫȭȯȱȳȴȵȶȷȸȹȼȿɀɐɑɒɓɔɕɖɗɘəɚɛɜɝɞɟɠɡɢɣɤɥɦɧɨɩɪɫɬɭɮɯɰɱɲɳɴɵɶɷɸɹɺɻɼɽɾɿʀʁʂʃʄʅʆʇʈʉʊʋʌʍʎʏʐʑʒʓʔʕʖʗʘʙʚʛʜʝʞʟʠʡʢʣʤʥʦʧʨʩʪʫʬʭʮʯΐάέήίΰαβγδεζηθικλμνξοπρςστυφχψωϊϋόύώϐϑϕϖϗϙϛϝϟϡϣϥϧϩϫϭϯϰϱϲϳϵϸϻϼабвгдежзийклмнопрстуфхцчшщъыьэюяѐёђѓєѕіїјљњћќѝўџѡѣѥѧѩѫѭѯѱѳѵѷѹѻѽѿҁҋҍҏґғҕҗҙқҝҟҡңҥҧҩҫҭүұҳҵҷҹһҽҿӂӄӆӈӊӌӎӑӓӕӗәӛӝӟӡӣӥӧөӫӭӯӱӳӵӷӹԁԃԅԇԉԋԍԏաբգդեզէըթժիլխծկհձղճմյնշոչպջռսվտրցւփքօֆևᴀᴁᴂᴃᴄᴅᴆᴇᴈᴉᴊᴋᴌᴍᴎᴏᴐᴑᴒᴓᴔᴕᴖᴗᴘᴙᴚᴛᴜᴝᴞᴟᴠᴡᴢᴣᴤᴥᴦᴧᴨᴩᴪᴫᵢᵣᵤᵥᵦᵧᵨᵩᵪᵫᵬᵭᵮᵯᵰᵱᵲᵳᵴᵵᵶᵷᵹᵺᵻᵼᵽᵾᵿᶀᶁᶂᶃᶄᶅᶆᶇᶈᶉᶊᶋᶌᶍᶎᶏᶐᶑᶒᶓᶔᶕᶖᶗᶘᶙᶚḁḃḅḇḉḋḍḏḑḓḕḗḙḛḝḟḡḣḥḧḩḫḭḯḱḳḵḷḹḻḽḿṁṃṅṇṉṋṍṏṑṓṕṗṙṛṝṟṡṣṥṧṩṫṭṯṱṳṵṷṹṻṽṿẁẃẅẇẉẋẍẏẑẓẕẖẗẘẙẚẛạảấầẩẫậắằẳẵặẹẻẽếềểễệỉịọỏốồổỗộớờởỡợụủứừửữựỳỵỷỹἀἁἂἃἄἅἆἇἐἑἒἓἔἕἠἡἢἣἤἥἦἧἰἱἲἳἴἵἶἷὀὁὂὃὄὅὐὑὒὓὔὕὖὗὠὡὢὣὤὥὦὧὰάὲέὴήὶίὸόὺύὼώᾀᾁᾂᾃᾄᾅᾆᾇᾐᾑᾒᾓᾔᾕᾖᾗᾠᾡᾢᾣᾤᾥᾦᾧᾰᾱᾲᾳᾴᾶᾷιῂῃῄῆῇῐῑῒΐῖῗῠῡῢΰῤῥῦῧῲῳῴῶῷⲁⲃⲅⲇⲉⲋⲍⲏⲑⲓⲕⲗⲙⲛⲝⲟⲡⲣⲥⲧⲩⲫⲭⲯⲱⲳⲵⲷⲹⲻⲽⲿⳁⳃⳅⳇⳉⳋⳍⳏⳑⳓⳕⳗⳙⳛⳝⳟⳡⳣⳤⴀⴁⴂⴃⴄⴅⴆⴇⴈⴉⴊⴋⴌⴍⴎⴏⴐⴑⴒⴓⴔⴕⴖⴗⴘⴙⴚⴛⴜⴝⴞⴟⴠⴡⴢⴣⴤⴥfffiflffifflſtstﬓﬔﬕﬖﬗ\d-_^]");
+		new r2 = pcre2.regex("\x{d7ff}", utf=true);
+		new r3 = pcre2.regex("\o{153777}", utf=true);
+		new r4 = pcre2.regex("\x{e000}", utf=true);
+		new r5 = pcre2.regex("\o{170000}", utf=true);
+		new r6 = pcre2.regex("[Ā-Ą]", utf=true);
+	}
+} -start
+
+varnish v1 -errvcl {vmod pcre2 error: Cannot compile '\x{110000}' in r constructor: character code point value in \x{} or \o{} is too large at offset 9} {
+	import pcre2 from "${vmod_topbuild}/src/.libs/libvmod_pcre2.so";
+	backend b { .host = "${bad_ip}"; }
+
+	sub vcl_init {
+		new r = pcre2.regex("\x{110000}", utf=true);
+	}
+}
+
+varnish v1 -errvcl {vmod pcre2 error: Cannot compile '\o{4200000}' in r constructor: character code point value in \x{} or \o{} is too large at offset 10} {
+	import pcre2 from "${vmod_topbuild}/src/.libs/libvmod_pcre2.so";
+	backend b { .host = "${bad_ip}"; }
+
+	sub vcl_init {
+		new r = pcre2.regex("\o{4200000}", utf=true);
+	}
+}
+
+varnish v1 -errvcl {vmod pcre2 error: Cannot compile '\x{ffffffff}' in r constructor: character code point value in \x{} or \o{} is too large at offset 11} {
+	import pcre2 from "${vmod_topbuild}/src/.libs/libvmod_pcre2.so";
+	backend b { .host = "${bad_ip}"; }
+
+	sub vcl_init {
+		new r = pcre2.regex("\x{ffffffff}", utf=true);
+	}
+}
+
+varnish v1 -errvcl {vmod pcre2 error: Cannot compile '\o{37777777777}' in r constructor: character code point value in \x{} or \o{} is too large at offset 14} {
+	import pcre2 from "${vmod_topbuild}/src/.libs/libvmod_pcre2.so";
+	backend b { .host = "${bad_ip}"; }
+
+	sub vcl_init {
+		new r = pcre2.regex("\o{37777777777}", utf=true);
+	}
+}
+
+varnish v1 -errvcl {vmod pcre2 error: Cannot compile '\x{d800}' in r constructor: disallowed Unicode code point (>= 0xd800 && <= 0xdfff) at offset 7} {
+	import pcre2 from "${vmod_topbuild}/src/.libs/libvmod_pcre2.so";
+	backend b { .host = "${bad_ip}"; }
+
+	sub vcl_init {
+		new r = pcre2.regex("\x{d800}", utf=true);
+	}
+}
+
+varnish v1 -errvcl {vmod pcre2 error: Cannot compile '\o{154000}' in r constructor: disallowed Unicode code point (>= 0xd800 && <= 0xdfff) at offset 9} {
+	import pcre2 from "${vmod_topbuild}/src/.libs/libvmod_pcre2.so";
+	backend b { .host = "${bad_ip}"; }
+
+	sub vcl_init {
+		new r = pcre2.regex("\o{154000}", utf=true);
+	}
+}
+
+varnish v1 -errvcl {vmod pcre2 error: Cannot compile '\x{dfff}' in r constructor: disallowed Unicode code point (>= 0xd800 && <= 0xdfff) at offset 7} {
+	import pcre2 from "${vmod_topbuild}/src/.libs/libvmod_pcre2.so";
+	backend b { .host = "${bad_ip}"; }
+
+	sub vcl_init {
+		new r = pcre2.regex("\x{dfff}", utf=true);
+	}
+}
+
+varnish v1 -errvcl {vmod pcre2 error: Cannot compile '\o{157777}' in r constructor: disallowed Unicode code point (>= 0xd800 && <= 0xdfff) at offset 9} {
+	import pcre2 from "${vmod_topbuild}/src/.libs/libvmod_pcre2.so";
+	backend b { .host = "${bad_ip}"; }
+
+	sub vcl_init {
+		new r = pcre2.regex("\o{157777}", utf=true);
+	}
+}
+
+varnish v1 -errvcl {vmod pcre2 error: Cannot compile '[\x{200}-\x{100}]' in r constructor: range out of order in character class at offset 15} {
+	import pcre2 from "${vmod_topbuild}/src/.libs/libvmod_pcre2.so";
+	backend b { .host = "${bad_ip}"; }
+
+	sub vcl_init {
+		new r = pcre2.regex("[\x{200}-\x{100}]", utf=true);
+	}
+}
+
+varnish v1 -errvcl {vmod pcre2 error: Cannot compile '[[:a\x{100}b:]]' in r constructor: unknown POSIX class name at offset 3} {
+	import pcre2 from "${vmod_topbuild}/src/.libs/libvmod_pcre2.so";
+	backend b { .host = "${bad_ip}"; }
+
+	sub vcl_init {
+		new r = pcre2.regex("[[:a\x{100}b:]]", utf=true);
+	}
+}
+
+varnish v1 -errvcl {vmod pcre2 error: Cannot compile '^\cģ' in r constructor: \c must be followed by a printable ASCII character at offset 3} {
+	import pcre2 from "${vmod_topbuild}/src/.libs/libvmod_pcre2.so";
+	backend b { .host = "${bad_ip}"; }
+
+	sub vcl_init {
+		new r = pcre2.regex("^\cģ", utf=true);
+	}
+}
+
+varnish v1 -errvcl {vmod pcre2 error: Cannot compile '\ud800' in r constructor: disallowed Unicode code point (>= 0xd800 && <= 0xdfff) at offset 6} {
+	import pcre2 from "${vmod_topbuild}/src/.libs/libvmod_pcre2.so";
+	backend b { .host = "${bad_ip}"; }
+
+	sub vcl_init {
+		new r = pcre2.regex("\ud800", utf=true, alt_bsux=true);
+	}
+}
+
+varnish v1 -errvcl {vmod pcre2 error: Cannot compile 'a(?<=A\XB)' in r constructor: lookbehind assertion is not fixed length at offset 1} {
+	import pcre2 from "${vmod_topbuild}/src/.libs/libvmod_pcre2.so";
+	backend b { .host = "${bad_ip}"; }
+
+	sub vcl_init {
+		new r = pcre2.regex("a(?<=A\XB)", utf=true);
+	}
+}
+
+varnish v1 -errvcl {vmod pcre2 error: Cannot compile 'a(?<=A\RB)' in r constructor: lookbehind assertion is not fixed length at offset 1} {
+	import pcre2 from "${vmod_topbuild}/src/.libs/libvmod_pcre2.so";
+	backend b { .host = "${bad_ip}"; }
+
+	sub vcl_init {
+		new r = pcre2.regex("a(?<=A\RB)", utf=true);
+	}
+}
+
+varnish v1 -errvcl {vmod pcre2 error: Cannot compile '[]' in r constructor: UTF-8 error: byte 2 top bits not 0x80 at offset 1} {
+	import pcre2 from "${vmod_topbuild}/src/.libs/libvmod_pcre2.so";
+	backend b { .host = "${bad_ip}"; }
+
+	sub vcl_init {
+		new r = pcre2.regex("[]", utf=true);
+	}
+}
+
+varnish v1 -errvcl {vmod pcre2 error: Cannot compile '' in r constructor: UTF-8 error: 1 byte missing at end at offset 0} {
+	import pcre2 from "${vmod_topbuild}/src/.libs/libvmod_pcre2.so";
+	backend b { .host = "${bad_ip}"; }
+
+	sub vcl_init {
+		new r = pcre2.regex("", utf=true);
+	}
+}
+
+varnish v1 -errvcl {vmod pcre2 error: Cannot compile 'xxx' in r constructor: UTF-8 error: byte 2 top bits not 0x80 at offset 0} {
+	import pcre2 from "${vmod_topbuild}/src/.libs/libvmod_pcre2.so";
+	backend b { .host = "${bad_ip}"; }
+
+	sub vcl_init {
+		new r = pcre2.regex("xxx", utf=true);
+	}
+}
+
+varnish v1 -errvcl {vmod pcre2 error: Cannot compile 'Â' in r constructor: UTF-8 error: isolated byte with 0x80 bit set at offset 2} {
+	import pcre2 from "${vmod_topbuild}/src/.libs/libvmod_pcre2.so";
+	backend b { .host = "${bad_ip}"; }
+
+	sub vcl_init {
+		new r = pcre2.regex("Â",
+		    		    utf=true);
+	}
+}
+
+varnish v1 -errvcl {vmod pcre2 error: Cannot compile '(*:*++++++++++++''''''''''''''''''''+''+++'+++x+++++++++++++++++++++++++++++++++++(++++++++++++++++++++:++++++%++:''''''''''''''''''''''''+++++++++++++++++++++++++++++++++++++++++++++++++++++-++++++++k+++++++''''+++'+++++++++++++++++++++++''''++++++++++++':ƿ)' in r constructor: name is too long in (*MARK), (*PRUNE), (*SKIP), or (*THEN) at offset 259} {
+	import pcre2 from "${vmod_topbuild}/src/.libs/libvmod_pcre2.so";
+	backend b { .host = "${bad_ip}"; }
+
+	sub vcl_init {
+		new r = pcre2.regex(utf=true, pattern=
+{"(*:*++++++++++++''''''''''''''''''''+''+++'+++x+++++++++++++++++++++++++++++++++++(++++++++++++++++++++:++++++%++:''''''''''''''''''''''''+++++++++++++++++++++++++++++++++++++++++++++++++++++-++++++++k+++++++''''+++'+++++++++++++++++++++++''''++++++++++++':ƿ)"});
+	}
+}