E.g. chromaprint expects to be fed 16bit signed PCM
in native endianness, yet there was no check for this.
Similarly for other muxers. Use the new
FF_OFMT_FLAG_ONLY_DEFAULT_CODECS to enfore this where
appropriate, e.g. for pcm/raw muxers.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>

Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>

AVOutputFormat has default codecs for audio, video and subtitle
and often these are the only codecs of this type allowed.
So add a flag to AVOutputFormat so that this can be checked generically.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>

Several muxers (e.g. pcm muxers) did not check the number
of streams even though the individual streams were not
recoverable from the muxed files. This commit changes
this by using the FF_OFMT_MAX_ONE_OF_EACH flag
where appropriate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>

More exactly: Not more than one stream of each type for which
a default codec (i.e. AVOutputFormat.(audio|video|subtitle)_codec)
is set; for those types for which no such codec is set (or for
which no designated default codec in AVOutputFormat exists at all)
no streams are permitted.

Given that with this flag set the default codecs become more important,
they are now set explicitly to AV_CODEC_ID_NONE for "unset";
the earlier code relied on AV_CODEC_ID_NONE being equal to zero,
so that default static initialization set it accordingly;
but this is not how one is supposed to use an enum.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>

This test muxes two streams into a single pcm file, although
the two streams are of course not recoverable from the output
(unless one has extra information). So use the streamhash muxer
instead (which also provides coverage for it; it was surprisingly
unused in FATE so far). This is in preparation for actually
enforcing a limit of one stream for the PCM muxers.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>

If AVOutputFormat.video_codec, audio_codec or subtitle_codec
is AV_CODEC_ID_NONE, it means that there is no default codec
for this format and not that it is supported to mux AV_CODEC_ID_NONE.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>

Avoids one #if.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>

It better reflects that this is a muxer-only flag.
Also document the flag.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>

(AVStream did not have an AVClass when this muxer was added.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>

Signal that anything except MP3 and the ID3V2 attached pic types
are forbidden.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>

Also use sizeof of the proper type, namely sizeof(**sd)
and not sizeof(*sd).
Reviewed-by: Jan Ekström <jeebjp@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>

av_frame_side_data_get() has a const AVFrameSideData * const *sd
parameter; so calling it with an AVFramesSideData **sd like
AVCodecContext.decoded_side_data (or with a AVFramesSideData * const
*sd) is safe, but the conversion is not performed automatically
in C. All users of this function therefore resort to a cast.

This commit changes this: av_frame_side_data_get() is renamed
to av_frame_side_data_get_c(); furthermore, a static inline
wrapper for it name av_frame_side_data_get() is added
that accepts an AVFramesSideData * const * and converts this
to const AVFramesSideData * const * in a Wcast-qual safe way.

This also allows to remove the casts from the current users.
Reviewed-by: Jan Ekström <jeebjp@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>

Reviewed-by: Jan Ekström <jeebjp@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>

The latter need not be save, because av_log() expects
to get a pointer to an AVClass-enabled structure
and not only a fake object. If this function were actually
be called in the following way:

const AVClass *avcl = avctx->av_class;
handle_mdcv(&avcl, );

the AVClass's item_name would expect to point to an actual
AVCodecContext, potentially leading to a segfault.
Reviewed-by: Jan Ekström <jeebjp@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>

This code uses the AVBPrint API for exactly one av_bprintf()
in a scenario in which a good upper bound for the needed
size of the buffer is available (with said upper bound being
much smaller than sizeof(AVBPrint)). So one can simply use
snprintf() instead. This also avoids the (always-false due to
the current size of the internal AVBPrint buffer) check for
whether the AVBPrint is complete.

Furthermore, the old code used AV_BPRINT_SIZE_AUTOMATIC
which implies that the AVBPrint buffer will never be
(re)allocated and yet it used av_bprint_finalize().
This has of course also been removed.
Reviewed-by: Jan Ekström <jeebjp@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>

Reviewed-by: Jan Ekström <jeebjp@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>

Reviewed-by: Zhao Zhili <quinkblack@foxmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>

Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>

Unnecessary since 67e7f0b0
as there are no longer two opaque fields.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>

Otherwise the last VDR would never get copied.

Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>

AVCodecContext extradata should be an AVCDecoderConfigurationRecord
when bitstream format is avcc. Simply concatenating the NALUs output
by x264_encoder_headers does not form a standard
AVCDecoderConfigurationRecord. The following cmd generates broken
file before the patch:

ffmpeg -i foo.mp4 -c:v libx264 -x264-params annexb=0 bar.mp4
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>

Many users mistakenly think that hwaccel is an instance of a decoder,
and cannot find the corresponding decoder name in the logs. Log
hwaccel name so user know hwaccel has taken effect.
Signed-off-by: Zhao Zhili <zhilizhao@tencent.com>

When the compiler chooses to inline put_amf_string(pb, ""),
the avio_write(pb, "", 0) can be avoided. Happens with
Clang-17 with -O1 and higher and GCC 13 with -O2 and higher
here.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>

These were defined in a way compatible with the Vulkan HEVC acceleration, which
expects bitmasks, yet the fields were being overwritting on each loop with the
latest read value.
Signed-off-by: James Almer <jamrial@gmail.com>

Fixes: timeout
Fixes: 64033/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_HEVC_fuzzer-5332101272305664
Signed-off-by: James Almer <jamrial@gmail.com>

Fixes: null pointer derference
Fixes: 67007/clusterfuzz-testcase-minimized-ffmpeg_dem_IAMF_fuzzer-6522819204677632
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>

Signed-off-by: James Almer <jamrial@gmail.com>

Signed-off-by: James Almer <jamrial@gmail.com>

While ensuring it's at least C11, the minimum supported version.
Also, enforce C11 on the host compiler, same as we already do for C11 on the
target compiler.
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>

The newer of these two are the separate integers for content light
level, introduced in 3952bf3e98c76c31594529a3fe34e056d3e3e2ea ,
with X265_BUILD 75. As we already require X265_BUILD of at least
89, no further conditions are required.

Both of these two structures were first available with X264_BUILD
163, so make relevant functionality conditional on the version
being at least such.

Keep handle_side_data available in all cases as this way X264_init
does not require additional version based conditions within it.

Finally, add a FATE test which verifies that pass-through of the
MDCV/CLL side data is working during encoding.

These two were added in 28e23d7f348c78d49a726c7469f9d4e38edec341
and 3558c1f2e97455e0b89edef31b9a72ab7fa30550 for version 0.9.0 of
SVT-AV1, which is also our minimum requirement right now.

In other words, no additional version limiting conditions seem
to be required.

Additionally, add a FATE test which verifies that pass-through of
the MDCV/CLL side data is working during encoding.

This enables further configuration of output based on the results
of input decoding and filtering in a similar manner as the color
information.

This allows configuring an encoder by using AVFrameSideData.